get_logs_dir(registry_dir) resolves the audit-log root as the
delegate_job_logs next to the registry in use when DELEGATE_JOB_LOGS_DIR
is not set; sibling_logs_dir() is the pure sibling rule. Every writer and
reader that knows its registry (registry, engine, publish_event, remote,
job_subscriber, reconcile.sh, the loop runner's fingerprint exclusion)
passes that root instead of falling back to the workspace default.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Review loop (--review-only, --all-reviewer): round 1 (@3a30d7d) 4/4 PASS;
each reviewer reproduced W1 failing on the pre-fix tree. Seven #50/#55 and
leak modules (112 tests) from a clean worktree left no .mam in the
checkout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
test_u1e_a_dry_run_record_is_not_an_open_job (PR #56) ran the delegate-job
wrapper without WORKSPACE_ROOT; the wrapper sources lib.sh, which then
defaults it to the checkout and rewrites <checkout>/.mam/shim/herdr
(found by review 38a64423). The node joins W1's list, which runs its
nodes in a copy of the checkout and fails on any .mam written there.
A scan of the #50/#55 and leak modules from a clean worktree found no
other writer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
- exit 5: a busy or missing target cancels the job; a superseded attempt
leaves the record to its new owner, unchanged
- install.sh copies a legacy .env to .mam.env and keeps the original
- restore-off fallback: without tomllib the file keeps only that key
(restore off, other settings lost, warning); restore on only when no
file can be written
- PoC: no token only when none is passed; tests: every test gets a temp
registry and log dir, most also the sandbox HOME and mock herdr
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
- install.sh: what it actually checks; it writes a starter .mam.env with
MQTT_BROKER=localhost (broker.hivemq.com is only the unset fallback);
install_mam.sh is a separate installer.
- Security: tokens exist only when given or when the broker has TLS or a
username (PoC: no signature check); the remote dispatch carries the token.
- Server isolation: create defaults to a workspace-named server; the shim
bootstraps only a named server and never when MAM_NO_AUTOSTART=1
(status/monitor); restore-off is the normal path, with a warning fallback.
- Loop: the selected reviewers must all pass; no reviewer option means a
creator self-review.
- Interpreter order with the PATH python3 fallback; exit 5 also covers
target_not_found; two layers with their own registries; test isolation
stated as sandboxes plus after-run guards; quick start uses named sessions.
- README.ko.md now mirrors README.md.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
Rewritten against the current code: the per-workspace shim is
.mam/shim/herdr routing with --session (not /tmp/multi-agent-herdr-shim
with -L), registry writes run in the workspace .venv (no dual-interpreter
split), and the missing pieces are added - the delegation contract (ack,
heartbeat, budget, busy wait, remote transport, exit codes), the review
loop (strict verdicts, review identity, sub-jobs, report promotion),
create --onboard exits 44/45, the per-server pane claim, restore-off
servers, worktree helpers and the test isolation rules. Layout and quick
start follow the tree.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
Review loop (--review-only, --all-reviewer): round 1 (@325b056) 4/4 PASS,
round 2 (@db7f4ca, HERDR_SESSION) 4/4 PASS. Full suite at 325b056 on
macOS / Python 3.9 / bash 3.2 / herdr 0.9.3 from an agent pane:
1845 passed / 0 failed / 56 skipped (18 test_deploy_freshness skips: no
nats-docker submodule in the fresh worktree); the panes of the real
servers (default, multi-agent-mux) and ~/.claude/projects were unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
A suite run from an agent pane with --basetemp .../pytest-pr56-shim left
seven workspaces on that pane's real server (multi-agent-mux):
- the real-herdr resolvers (lib.sh _is_shim_path and the generated shim)
skipped every PATH directory with "-shim" anywhere in its path, so the
basetemp hid the mock's bin/ and the real herdr ran; only a directory
that is itself *-shim is a wrapper now;
- mam_sandbox kept HERDR_SOCKET_PATH (and the pane/tab ids), which the real
herdr follows over the sandbox HOME; it drops them now.
tests/test_herdr_real_server_leak.py: L1 (ancestor *-shim, both resolvers)
and L2 (pane routing dropped) fail before the fix; L1b keeps a *-shim
wrapper directory excluded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
Merge review on macOS (--review-only loops, --all-reviewer): round 1 at
320aa9f 4/4 NOT PASS, round 2 codex F1 (a claimed dry-run job holds its
session), round 3 4/4 PASS (discarded: the worktree changed mid-review),
round 4 at 21f0c12 claude/agy/grok PASS with codex interrupted by a stream
disconnect, round 5 codex PASS. Full suite at 21f0c12 on macOS / Python
3.9 / bash 3.2 / herdr 0.9.3: 1860 passed / 0 failed / 38 skipped; no new
entries in ~/.claude/projects.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
A `default` scan runs without -L, so the shim answers it from the inherited
HERDR_SESSION_NAME; a create's reconcile --once labelled that server's panes
`default`, and since create adopts only a row of its own server (1e25cf2f
F2), parallel creates in one folder were refused (test_tier4_e2e scenario 4).
The skill-blocks data follows create_session.sh's SystemExit line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
- admission: a `submit --dry-run` record is marked dry_run and is not an
open job of its session (review 1e25cf2f F1)
- create: the monitor-row adoption requires the row's server to be the one
this create spawned on (review 1e25cf2f F2)
- pane lock: retry only on contention (BlockingIOError); the docs say the
flock lasts while any fd-9 holder (the claim shell and the shim) lives
(review 66680d9d)
- tests on macOS: real-herdr box HOMEs under /tmp (sun_path is 104 bytes),
resolved paths, the fake claude reads non-canonical input (MAX_CANON 1024)
and the pane is read unwrapped; lock holders exec their sleep so killing
them frees the lock; the adoption tests name the server
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
The live onboarding test asserted that the first job's wrapper registered in
the same wall-clock second as the onboarding it had just placed at a second
boundary. Process start-up has no sub-second contract, so the setup assertion
failed now and then before any dispatch behaviour was checked. The test now
stamps the onboarding record, which it owns and which nothing else depends on
yet, with the job's created_at once that record exists; the stamp is written
by atomic replace so a scanning wrapper never skips a half-written record.
The lifecycle assertions and the fixed-id tie coverage in test_u2h are unchanged.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
open_jobs reports a live pending record nobody signals on as `injected`:
its producer registered and injected it without a waiter (create
--onboard, a job sent by hand), so it holds the session like a running or
admitted job, and a waiter of the same second with a lower job id, or one
registered a moment earlier and still in its preflight, no longer passes
it in the FIFO. The waiter signals on its own record before its first
scan, so its record is never mistaken for one.
lib_py.pane_lock resolves the shim's ambient target (no -L,
HERDR_SESSION_NAME empty or `default`) to the server of the pane the
caller runs in - HERDR_SESSION, else HERDR_SOCKET_PATH's layout, as
lib.sh _herdr_caller_server reads them - so an ambient and a named call
into one server claim under one lock; outside a pane it stays the
default server's.
Tests: u2h (the tie, the later-registered onboarding, the signalled
control), u1/u4 labels, c10 forces the same-second registration, p1b,
s2 (real herdr: held lock stops both call forms; mixed concurrent calls
take distinct panes). Two FIFO fixtures now carry a waiter's signal.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The registry wait judged its record by one rule: not this attempt's
pending record in this session -> superseded (redispatched, moved or
closed by someone else). That also caught the record's own `started`
landing before the prompt went out - the Issue #14 registry ack winning
over an unreachable broker, as test_issue30_stall_watch_stop acknowledges
at registration - and the wrapper left on exit 5 instead of its
broker_unavailable path (rc 3).
A record that is running under this attempt's token in this session is
this attempt's own progress: the waiter answers `clear` at once, writes
no admission and starts no hold. Another token, another session or a
terminal status stay `superseded` (review 55219be1 R1 unchanged).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Three `create --onboard` at once into one folder (the control root, so no
control-plane prefix reaches the pane and the shim reuses an idle pane):
the shim's new-session chooses a pane - an idle one in a workspace on the
same cwd, a split, a fresh workspace's root pane - and then claims it with
`agent start`; two shims could choose the pane one of them had just made,
and the later start failed with agent_pane_busy (one create in three).
mam_herdr now runs every new-session call holding one lock per server: a
flock on fd 9, opened for the block and taken by lib_py.pane_lock, which
also bounds the wait (MAM_PANE_CLAIM_WAIT_S, default 120). It is released
with the block or with the process, however it ends. The shim heredoc is
unchanged (S11). Other servers' creates are not held.
Serialising the claims exposed a second race: a create's end-of-run
`reconcile.sh --once` adopted the pane of another create that had not yet
written its row, and that create refused its own name as already running
(exit 4). Such a row - registered by the monitor, no job, for a pane
created after this create began - is now replaced, not refused.
Tests: real herdr - shim-level and create-level three-way races into one
folder (the real herdr's pane-creating replies held back so the window is
hit on every run; both fail on the base with the orchestrator's error),
the different-folder test kept; pane_lock unit tests (per-server file,
timeout, kill -9 holder, handover, knob); the adoption rule and its three
refusals; shim contract h26 (held lock: no pane calls). The herdr box gets
a ~/.zshrc: without it every first `agent start` typed into zsh's first-run
menu and timed out at 30 s.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
R1: wait-open-jobs takes --dispatch-token (the token the wrapper read for
this attempt) and keeps it, with the session it asked about, for its whole
life; every write (signal, admission, the hold's renewal) is a guarded
engine merge that re-reads the record under the registry lock and refuses
once the record is not that attempt's pending one in that session. A record
redispatched, moved or closed by someone else makes the waiter answer
`superseded`: the bash wrapper exits 5 without a close, the record is its
new owner's. hold-admission is given the waiter's pinned identity instead
of reading a token from disk, so a hold that starts late holds nothing.
R2: a pending record that never carried a waiter's signal (create --onboard
registers and injects directly and waits ack_timeout_sec for `started`) is
live for that budget from created_at, not for the 30 s signal window; the
window applies only once a dispatcher has signalled.
Tests: u1 rows for the two pending lifetimes, u3b asserts the guard, u3f/u3g/u3h
(cross-session redispatch, in-place attempt change, token changed before the
waiter started) with the real waiter subprocess, u4e/u4f (late hold, running
hold released by a redispatch), s1 pins the token argument and the no-close
branch; real herdr C10 (onboarding valid before and after 30 s blocks the
session), C11 (expired onboarding is stale), C12 (redispatched waiter leaves
its record alone, exit 5).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
F1: `clear` is now an admission persisted on the released record - a merge
through the engine whose new `guard` re-reads the session's open jobs under
the registry lock, so two waiters cannot both be admitted. It is scoped to
the attempt by the dispatch token (a redispatch voids it) and reported as
`admitted` to every other waiter, which holds the session as a running job
does, whatever its FIFO place: a lower id in the same second or a
redispatched older loop job now waits.
F2: a pending record's liveness window is the dispatcher's signal cadence
times three misses (10 s x 3 = 30 s), no longer ack_timeout_sec, which the
agent's budget takes down to 1 s. After `clear` a detached hold renews the
admitted record's signal until the record leaves pending, its attempt
changes, the wrapper is gone, or the wall clock ends.
Tests: u1 boundaries, u1d/u2e/u2f/u2g/u3d/u3e for the admission, u4c/u4d for
the hold, s1 pins --hold; real herdr: C3/C7/C8 adjusted, C9 is C8's
live-owner counterpart with short ack windows.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The `--status pending` reset is a redispatch and issues a new dispatch
token, but the loop read `_disp_tok` only after the registry and idle waits.
A busy or idle_wait close from phase two on therefore carried the previous
phase's token and the engine refused it, leaving the record pending while
the caller saw session_busy. The read now follows the reset directly; s1
pins reset < token read < registry wait.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
F1: from phase two on, the loop's `_registry_wait` ran before the record was
reset to pending, so the waiter held a terminal record: the engine refused its
dispatch_wait_at merge and other waiters never saw it in the FIFO. The wait
(and the idle wait after it) now follows the `--status pending` update; s1
pins the order and u3c shows why a terminal self record cannot signal.
F2: the real-herdr box teardown survives a hung stop/delete, kills a server
bootstrapped by a late client call, and asserts the server and HOME are gone.
F3: the delegate-job SKILL.md exit 5 row names the registry wait.
Also drops the dead loop in s1.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The FIFO is (created_at, job_id) at second resolution; B and C registered
within the same second once in the full suite, C sorted first by id and
cleared while B's signal was still fresh, so the stale line never printed.
C7 already keeps the 1.2 s gap; C8 now does too and asserts the order.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
MAM_ONBOARD_WAIT_S (min 1, 600) and MAM_DISPATCH_WAIT_S (min 0, 600) in
test_issue26_ints.INT_KNOBS, which pins every mam_int_knob call. The
real-herdr box's teardown removes its HOME once more after a second:
herdr writes .local/state/herdr/agent-detection a moment after the
server is gone, which left an empty /tmp/mam50-* behind.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Reproduction first (herdr 0.9.3, a real claude, one-off server, job
51ccd800): after a job that left a background subagent running
(`← 1 agent` on screen for 5 min), herdr reported `working` only while
the job ran and `idle` ~10 s after `completed`; a second submit with a
20 s idle wait was injected, not cancelled. The 2026-10-04 observation
(0.9.1, 10+ min of `working`) does not reproduce on 0.9.3, so the herdr
idle wait stays and the registry wait runs before it (plan §4.3 (나)).
- lib_py/delegation/wrapper.py: `open-jobs` (diagnostic) and
`wait-open-jobs`. An open job of the session is live when the #18
contract says so: `running` with an event in events.log within
idle_timeout_sec; `pending` with a dispatch signal (dispatch_wait_at,
else created_at) within ack_timeout_sec. A dead record is reported
(`stale open job <id> ignored (...)`) and never waited for. The waiter
signals every 10 s by merging dispatch_wait_at into its own pending
record through the registry's transition boundary (status untouched, no
event), so later waiters see it alive; a waiter whose wrapper is gone
stops and its signal goes stale (Creator's challenge, job bf8863e1).
Release is FIFO by (created_at, job_id): `clear` when no live running
job remains and this job is the earliest live pending one; `busy <ids>`
at the bound min(MAM_DISPATCH_WAIT_S, remaining wall clock).
- the wrapper: _registry_wait after the preflight in both dispatch paths;
`busy` closes the job as cancelled/session_busy (phase registry_wait),
exit 5 - the existing contract.
- tests/test_issue50_dispatch.py: the open-job table (status x age x
signal x spelling), FIFO and the tie, the signal as a registry merge,
the bound, a dead wrapper, finalize-end's new phase, both call sites.
- tests/test_issue50_dispatch_herdr.py: a real herdr 0.9.3 server per
test (short mkdtemp HOME, fake claude the server reports idle, the real
publish path over the suite's broker): C1 wait-then-run, C2 the bound,
C3 a dead running record, C4 the loop runner's first job behind an
onboarding, C5 a session without a row, C7 two waiters in FIFO order
with no cancellation, C8 a killed waiter skipped once stale; and three
concurrent `create --onboard` / `worktree_prepare.sh --onboard` in one
server (one server process survives the shims' concurrent bootstrap,
so no bootstrap lock is needed).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The handshake only said the agent saw the prompt (#23). create_session.sh
now waits, after `started`, for the onboarding job to reach a terminal
status and makes that its own result, so the orchestrator learns it from
create's exit (MULTI_AGENT_RULES §6) instead of guessing from herdr's
agent_status:
- lib_py/delegation/wrapper.py: `wait-terminal` (completed|error|cancelled,
`timeout` after --timeout, `missing` when the record is gone; stops with
its caller via --watch-pid) and `onboard-exit` (completed 0, error or
cancelled 44, timeout or missing 45). bash branches on the printed answer.
- lib.sh: delegate_wait_terminal / delegate_onboard_exit, thin calls.
- create_session.sh: `onboarding completed: job <id> (<n>s)` on stdout, or
`last_visible_status: onboarding-<status>` on the row, the reason on stderr
and `exit 44` / `exit 45` after `trap - EXIT` - the session is kept, as for
a missing handshake. The "no started" path (error, exit 0 before) now ends
with 44. MAM_ONBOARD_WAIT_S (default 600, floor 1) bounds the wait.
- worktree_prepare.sh: 44/45 pass through with "session and worktree kept".
- create SKILL.md exit table (44, 45) and the knob; the #42 inventory follows.
- tests/conftest.py: --onboard is the default, so ~60 sandbox create tests
reach the new wait. The mock herdr now acts as the agent for create's
onboarding prompt - it runs the publish commands the prompt names through
the real publish_event.py - and MAM_ONBOARD_WAIT_S=3 caps a test that turns
that off (MAM_MOCK_ONBOARD_HANDSHAKE=0 -> 44, `started` -> 45). The
delegate-job wrapper's prompt has another shape and is never answered.
- tests/test_issue50_onboard.py: the decision tables, create in the sandbox
(0 / 44 / 45, session kept, row note, trap window), the knob's integer
rule, worktree_prepare's pass-through.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
An agent pane inherits HOME_DIR, CLAUDE_PROJECT_DIR and LOCAL_BIN from
lib.sh's exports (and the adapters read CODEX_HOME). DiscoveryContext
prefers CLAUDE_PROJECT_DIR over the home_dir a test passes and every
adapter path reads HOME_DIR before HOME, so a suite run by an agent
wrote fake conversation folders into the user's real ~/.claude/projects
(test_adapter_discover, 40 folders on 2026-10-10).
- conftest._isolate_agent_homes (autouse): drops the four pane variables
for every test, so HOME - which the suite's tests set for an isolated
home - governs, as in a plain shell. Dropped rather than pointed into
tmp_path: a fixture-set HOME_DIR would shadow the 11 adapter-contract
tests that set HOME alone, the same way the pane's value did.
- conftest.agent_home_leak_guard (session autouse) + tests/_agent_home_guard.py:
snapshots the entry names of the real claude/agy/codex/grok/opencode/
hermes conversation directories (as the ambient environment names them,
recorded in pytest_configure) and fails on new ones; read-only. A claude
folder whose name decodes (against the file system) to a real directory
outside the temp roots is an operating agent's and is not counted.
- tests/test_issue55_agent_homes.py: the dropped-variable list is pinned
against the env reads of lib_py/agents, lib_py/paths.py and lib.sh;
guard unit tests; the issue's reproduction as a subprocess regression
(on base 42e5173 it leaves <dir>/-…-test-adapter-discover0-ws/u-c1.jsonl).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Merge-workspace review loop (--all-reviewer): round 1 (@a93c9bf) 4/4
PASS. Full suite at a93c9bf on macOS / Python 3.9 / herdr 0.9.3 with
WORKSPACE_ROOT set to an empty sentinel: 1752 passed / 0 failed / 38
skipped; the sentinel stayed empty, the review worktree had no .mam, and
the main checkout's shim was not touched.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
test_b13_reexec_preserves_original_argv and test_b13_no_freeze_switch_
disables_reexec ran the checkout's run_loop.sh with --creator, which gets
past argument parsing to mam_acquire_loop_lock on the default marker,
$MAM_REAL_ROOT/.mam/loop-guard-active with MAM_REAL_ROOT = the script's own
checkout. In the main checkout that is the live loop's lock (taken and
released for a moment: a real loop refused, or the test refused); in a review
tree it left an empty .mam. Both now set MAM_LOOP_MARKER under their tmp_path.
A sweep of the 16 modules that use run_loop.sh (a per-test watcher for a new
.mam in the checkout, an empty .mam removed before each test) found only
these two; the others pin MAM_LOOP_MARKER already, end before the lock
(--help, argument errors), or run a copy of the tree.
Tests: test_loop_marker_isolation.py L1 runs every test that reaches the lock
through the checkout's run_loop.sh in a copy of the checkout and requires no
.mam there; W1 of the Issue #17 isolation test now also requires that no .mam
exists (it only looked for files, so the empty lock directory passed it). At
97c2946 both fail.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HCGpJXhSZasJLU38ksDghe
Merge-workspace review loop (--all-reviewer): round 1 (@d198dd5) claude
agy PASS, grok codex NOT PASS (the same inherited WORKSPACE_ROOT in eleven
more modules; test_orc_onboard's import-time env); fixed in 8b47cc7.
Round 2 claude grok NOT PASS (test_o2_race_free_lock, test_o1_rebuttal
missed), agy codex PASS; fixed in ac48cb7. Round 3 (@ac48cb7) 4/4 PASS.
Full suite at ac48cb7 on macOS / Python 3.9 / herdr 0.9.3 with
WORKSPACE_ROOT set to an empty sentinel: 1751 passed / 0 failed / 38
skipped; the sentinel stayed empty and the main checkout's shim was not
touched.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
Two modules still ran the checkout's run_loop.sh - which sources lib.sh
before it parses an option - with the process environment and no root of
their own: test_o2_race_free_lock's test_o2_12 (review claude; it was in the
sweep's list and missed in 8b47cc7) and test_o1_rebuttal's
test_v3_rebut_option_parsing_and_budget, whose calls pass no env (review
grok; outside the env-copy grep). Both now use own_workspace_root, and W1
runs one node of each: at 8b47cc7 W1 fails with the copy's .mam/shim/herdr.
A last pass over the test files that run lib.sh, run_loop.sh, the wrapper or a
skill script: every one is marked, uses mam_sandbox or pins WORKSPACE_ROOT,
or does not source lib.sh (b7 diff_collect, deploy, issue42, issue45 config,
issue5_phase0, local_mqtt).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HCGpJXhSZasJLU38ksDghe
d198dd5 fixed one helper; the same defect was in eleven more modules
(reviews grok and codex R1/R2): their shells inherited the process
environment, so each `source lib.sh` rewrote <WORKSPACE_ROOT>/.mam/shim/herdr
- the checkout's own when the variable is unset or names this checkout (which
pytest_configure keeps), another workspace's under --noconftest.
- conftest: own_workspace_root, an opt-in fixture setting WORKSPACE_ROOT to
<tmp_path>/.mam-test-state/workspace. Not autouse: runner.py and
mqtt_common read WORKSPACE_ROOT in-process, and some tests unset it on
purpose. mam_sandbox and explicit envs run later and still win.
- pytestmark usefixtures("own_workspace_root") in test_version_consistency,
test_b19_headless_reconcile_fixes, test_b8_send_keys_verification,
test_issue6_fail_closed, test_loop_cli, test_issue5_phase3_loop,
test_issue5_phase4_runtime, test_o3_scoped_guard, test_issue25_plan_reuse,
test_orc_onboard (their shells inherit os.environ, many with no env at all).
- test_orc_onboard (R2): SCRUBBED_ENV is taken at import and no longer
carries WORKSPACE_ROOT; every call builds _scrubbed_env(root) with the root
of the call (ws / cwd / mam_sandbox, else this test's).
- test_workspace_scope (unittest) and test_issue21_worktree_prereqs._mutate
pin the root they already create.
Tests (test_issue17_workspace_root_isolation.py): W1 copies the checkout and
runs one test of each of those modules there with WORKSPACE_ROOT naming the
copy - the copy gets no .mam; W2 imports test_orc_onboard under a sentinel
root, then calls it under another - the sentinel stays empty. At d198dd5 both
fail (the copy gets .mam/shim/herdr; the sentinel gets it).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HCGpJXhSZasJLU38ksDghe
_env kept an inherited WORKSPACE_ROOT, so every helper that sources the
wrapper (lib.sh's _init_herdr_isolation) rewrote <that workspace>/.mam/shim/
herdr - another workspace's during the PR #51 review (v4.8.7 review, claude).
Only dropping it is not enough: lib.sh then derives the checkout itself, and
conftest keeps a WORKSPACE_ROOT that names this checkout, so the run would
rewrite the checkout's own shim (the real one when this is the main
checkout). _env now sets WORKSPACE_ROOT to the test's tmp dir.
Test: with a sentinel WORKSPACE_ROOT in the environment, _run_both and a
direct _env run leave the sentinel empty and the checkout's shim untouched,
and the shell sees the tmp dir. With the old _env the sentinel gets
.mam/shim/herdr.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HCGpJXhSZasJLU38ksDghe
Merge-workspace review loop (--all-reviewer): round 1 (@8241bd5) claude
grok PASS, agy NOT PASS (two static wrapper-literal tests did not follow
_decided/_exit_for), codex NOT PASS (R1: a yes/no decision that could not
run read as "no"); fixed in 541c3fe and 65b78b6. Round 2 (@65b78b6) 4/4
PASS. Full suite at 65b78b6 on macOS / Python 3.9 / herdr 0.9.3: 1730
passed / 0 failed / 56 skipped; 18 of the skips were the uninitialized
nats-docker submodule in the fresh worktree, and with it
tests/test_deploy_freshness.py is 31 passed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
subscriber-up and stall-watch answered only by exit code, so a call that
could not run (module error rc 1, missing interpreter 127) read as "no":
with a subscriber that had ended 0, the error path mapped 0 to completed
and the submit ended with 0; a failed stall-watch silently skipped the
watcher.
Both now take --print: the answer is printed as yes/no and the exit code
is 0 for either. The wrapper asks with --print through _decided_yes, so a
nonzero exit, no answer or anything else is _decision_failed (ERROR line,
exit 1). Without --print the rc contract is unchanged (yes 0, no 1).
Tests: subscriber-up (direct and loop/discuss call sites) and stall-watch,
each failing by traceback, rc 127 or no answer with a subscriber that
ended 0, end the submit with 1 and the ERROR line - at 8241bd5 eight of the
nine ended with 0 (the loop/no-answer one ended with 1 through the loop's
own result and failed only on the ERROR line); yes and no keep their
branches in both paths; --print unit table; the static guard forbids an
rc-read yes/no decision.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HCGpJXhSZasJLU38ksDghe
a670ef5 routed the wrapper's sub-status and exit-code decisions through
_decided / _exit_for, but test_tier1_unit G-10 and test_issue5's
test_wrapper_exit_code_mapping_literals_are_frozen still looked for the raw
`_decide sub-status "$sub_rc"` and `_decide exit-code "$job_status"`. They now
pin `_decided job_status sub-status "$sub_rc"` and `_exit_for "$job_status"`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HCGpJXhSZasJLU38ksDghe
Sourcing the wrapper sources lib.sh, which writes $WORKSPACE_ROOT/.mam/shim/
herdr; without WORKSPACE_ROOT that is the checkout. The new N2 wait-rc test
now runs with its tmp dir as WORKSPACE_ROOT, so the N2 tests leave the
checkout untouched. (The existing C tests in this file still write the
checkout's .mam/shim/herdr, as at 56d0bfd - not changed here.)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HCGpJXhSZasJLU38ksDghe
mam_int / mam_int_knob call `python3 -I` because the file is also sourced
without lib.sh and so without $PY. The header now says so, and that without
a python3 on PATH they print nothing (rc 127). The code is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HCGpJXhSZasJLU38ksDghe
"Stdlib only" is true of the module, not of how the wrapper runs it:
`python -m lib_py.delegation.wrapper` imports lib_py/delegation/__init__.py
first, which loads the service and paho-mqtt. The docstring now says so; the
wrapper's $PY already needs paho. The run path is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HCGpJXhSZasJLU38ksDghe
`exit "$(_decide exit-code ...)"` became `exit ""` when wrapper.py could
not answer (its module or $PY broken): rc 255 on bash 3.2. The other printed
decisions failed open in their own ways: a failed wait-rc returned "" (255),
a failed finalize-begin left finalize-end with an empty --final (argparse
rc 2), and a failed sub-status or finalize-end ended under set -e with the
interpreter's own code (1 for a traceback, 127 for one that cannot run).
Printed decisions now go through _decided <var> <subcommand>, and the
exits through _exit_for <status>: a failed call, an empty answer or a
non-numeric exit code / wait rc prints one ERROR line and exits 1. finalize-
end may legitimately answer nothing (its wrapper gone), so only its rc is
checked. The normal path is unchanged: same answers, exit codes and output.
Left as they are: subscriber-up and stall-watch are answered by rc, so a
failure reads as "no" - the subscriber is then treated as dead (the error
path, whose sub-status/exit-code are now fail-closed) and the notify-only
stall watcher is not started.
Tests (F): the real submit (human job, unreachable broker, 3 s budget) with
a $PY that fails one decision - exit-code, sub-status, finalize-begin,
finalize-end; traceback, rc 127 or no answer - ends with 1 and the ERROR
line; the same run without a failure still ends with 3. cmd_wait with a
failing wait-rc ends with 1. A static guard keeps printed decisions off
raw $(...). At 56d0bfd: exit-code 255/255, finalize-begin 2/2, wait-rc
255/255, sub-status and finalize-end 127 for "gone"; the traceback and
no-answer cases there already ended with 1 (by set -e or by the empty
status mapping to 1) and fail only on the missing ERROR line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HCGpJXhSZasJLU38ksDghe
With the cwd premise fixed, test_b still failed on herdr 0.9.3: a pane whose
saved directory is gone is restored as a placeholder - `restore_error`
"Saved directory is unavailable...", no process - and `pane process-info`
answers pane_not_found. close_restored_shells raised on it and exited 1
before looking at the other panes, so the resumed session's removed-worktree
pane (the case #45 closes on herdr 0.9.1, where it is a shell in $HOME) was
left behind.
Such a pane has nothing running, so it now meets condition 4. Only that
exact answer counts - restore_error set AND pane_not_found; any other
process-info failure still stops the run with exit 1 as before.
Tests: test_issue45_restore.py passes on herdr 0.9.3 (5/5). Unit tests with a
stub herdr: the placeholder is closed (fails at 56d0bfd); pane_not_found
without restore_error, or restore_error with another error, still raises.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HCGpJXhSZasJLU38ksDghe
GodopuandClaude Fable 5.1
GodopuandClaude Fable 5.1