Merge review on macOS (--review-only loops, --all-reviewer): round 1 at
320aa9f 4/4 NOT PASS, round 2 codex F1 (a claimed dry-run job holds its
session), round 3 4/4 PASS (discarded: the worktree changed mid-review),
round 4 at 21f0c12 claude/agy/grok PASS with codex interrupted by a stream
disconnect, round 5 codex PASS. Full suite at 21f0c12 on macOS / Python
3.9 / bash 3.2 / herdr 0.9.3: 1860 passed / 0 failed / 38 skipped; no new
entries in ~/.claude/projects.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
A `default` scan runs without -L, so the shim answers it from the inherited
HERDR_SESSION_NAME; a create's reconcile --once labelled that server's panes
`default`, and since create adopts only a row of its own server (1e25cf2f
F2), parallel creates in one folder were refused (test_tier4_e2e scenario 4).
The skill-blocks data follows create_session.sh's SystemExit line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
- admission: a `submit --dry-run` record is marked dry_run and is not an
open job of its session (review 1e25cf2f F1)
- create: the monitor-row adoption requires the row's server to be the one
this create spawned on (review 1e25cf2f F2)
- pane lock: retry only on contention (BlockingIOError); the docs say the
flock lasts while any fd-9 holder (the claim shell and the shim) lives
(review 66680d9d)
- tests on macOS: real-herdr box HOMEs under /tmp (sun_path is 104 bytes),
resolved paths, the fake claude reads non-canonical input (MAX_CANON 1024)
and the pane is read unwrapped; lock holders exec their sleep so killing
them frees the lock; the adoption tests name the server
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VCgu9Fa9iT7TbJUSzdq4Ff
The live onboarding test asserted that the first job's wrapper registered in
the same wall-clock second as the onboarding it had just placed at a second
boundary. Process start-up has no sub-second contract, so the setup assertion
failed now and then before any dispatch behaviour was checked. The test now
stamps the onboarding record, which it owns and which nothing else depends on
yet, with the job's created_at once that record exists; the stamp is written
by atomic replace so a scanning wrapper never skips a half-written record.
The lifecycle assertions and the fixed-id tie coverage in test_u2h are unchanged.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
open_jobs reports a live pending record nobody signals on as `injected`:
its producer registered and injected it without a waiter (create
--onboard, a job sent by hand), so it holds the session like a running or
admitted job, and a waiter of the same second with a lower job id, or one
registered a moment earlier and still in its preflight, no longer passes
it in the FIFO. The waiter signals on its own record before its first
scan, so its record is never mistaken for one.
lib_py.pane_lock resolves the shim's ambient target (no -L,
HERDR_SESSION_NAME empty or `default`) to the server of the pane the
caller runs in - HERDR_SESSION, else HERDR_SOCKET_PATH's layout, as
lib.sh _herdr_caller_server reads them - so an ambient and a named call
into one server claim under one lock; outside a pane it stays the
default server's.
Tests: u2h (the tie, the later-registered onboarding, the signalled
control), u1/u4 labels, c10 forces the same-second registration, p1b,
s2 (real herdr: held lock stops both call forms; mixed concurrent calls
take distinct panes). Two FIFO fixtures now carry a waiter's signal.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The registry wait judged its record by one rule: not this attempt's
pending record in this session -> superseded (redispatched, moved or
closed by someone else). That also caught the record's own `started`
landing before the prompt went out - the Issue #14 registry ack winning
over an unreachable broker, as test_issue30_stall_watch_stop acknowledges
at registration - and the wrapper left on exit 5 instead of its
broker_unavailable path (rc 3).
A record that is running under this attempt's token in this session is
this attempt's own progress: the waiter answers `clear` at once, writes
no admission and starts no hold. Another token, another session or a
terminal status stay `superseded` (review 55219be1 R1 unchanged).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Three `create --onboard` at once into one folder (the control root, so no
control-plane prefix reaches the pane and the shim reuses an idle pane):
the shim's new-session chooses a pane - an idle one in a workspace on the
same cwd, a split, a fresh workspace's root pane - and then claims it with
`agent start`; two shims could choose the pane one of them had just made,
and the later start failed with agent_pane_busy (one create in three).
mam_herdr now runs every new-session call holding one lock per server: a
flock on fd 9, opened for the block and taken by lib_py.pane_lock, which
also bounds the wait (MAM_PANE_CLAIM_WAIT_S, default 120). It is released
with the block or with the process, however it ends. The shim heredoc is
unchanged (S11). Other servers' creates are not held.
Serialising the claims exposed a second race: a create's end-of-run
`reconcile.sh --once` adopted the pane of another create that had not yet
written its row, and that create refused its own name as already running
(exit 4). Such a row - registered by the monitor, no job, for a pane
created after this create began - is now replaced, not refused.
Tests: real herdr - shim-level and create-level three-way races into one
folder (the real herdr's pane-creating replies held back so the window is
hit on every run; both fail on the base with the orchestrator's error),
the different-folder test kept; pane_lock unit tests (per-server file,
timeout, kill -9 holder, handover, knob); the adoption rule and its three
refusals; shim contract h26 (held lock: no pane calls). The herdr box gets
a ~/.zshrc: without it every first `agent start` typed into zsh's first-run
menu and timed out at 30 s.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
R1: wait-open-jobs takes --dispatch-token (the token the wrapper read for
this attempt) and keeps it, with the session it asked about, for its whole
life; every write (signal, admission, the hold's renewal) is a guarded
engine merge that re-reads the record under the registry lock and refuses
once the record is not that attempt's pending one in that session. A record
redispatched, moved or closed by someone else makes the waiter answer
`superseded`: the bash wrapper exits 5 without a close, the record is its
new owner's. hold-admission is given the waiter's pinned identity instead
of reading a token from disk, so a hold that starts late holds nothing.
R2: a pending record that never carried a waiter's signal (create --onboard
registers and injects directly and waits ack_timeout_sec for `started`) is
live for that budget from created_at, not for the 30 s signal window; the
window applies only once a dispatcher has signalled.
Tests: u1 rows for the two pending lifetimes, u3b asserts the guard, u3f/u3g/u3h
(cross-session redispatch, in-place attempt change, token changed before the
waiter started) with the real waiter subprocess, u4e/u4f (late hold, running
hold released by a redispatch), s1 pins the token argument and the no-close
branch; real herdr C10 (onboarding valid before and after 30 s blocks the
session), C11 (expired onboarding is stale), C12 (redispatched waiter leaves
its record alone, exit 5).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
F1: `clear` is now an admission persisted on the released record - a merge
through the engine whose new `guard` re-reads the session's open jobs under
the registry lock, so two waiters cannot both be admitted. It is scoped to
the attempt by the dispatch token (a redispatch voids it) and reported as
`admitted` to every other waiter, which holds the session as a running job
does, whatever its FIFO place: a lower id in the same second or a
redispatched older loop job now waits.
F2: a pending record's liveness window is the dispatcher's signal cadence
times three misses (10 s x 3 = 30 s), no longer ack_timeout_sec, which the
agent's budget takes down to 1 s. After `clear` a detached hold renews the
admitted record's signal until the record leaves pending, its attempt
changes, the wrapper is gone, or the wall clock ends.
Tests: u1 boundaries, u1d/u2e/u2f/u2g/u3d/u3e for the admission, u4c/u4d for
the hold, s1 pins --hold; real herdr: C3/C7/C8 adjusted, C9 is C8's
live-owner counterpart with short ack windows.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The `--status pending` reset is a redispatch and issues a new dispatch
token, but the loop read `_disp_tok` only after the registry and idle waits.
A busy or idle_wait close from phase two on therefore carried the previous
phase's token and the engine refused it, leaving the record pending while
the caller saw session_busy. The read now follows the reset directly; s1
pins reset < token read < registry wait.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
F1: from phase two on, the loop's `_registry_wait` ran before the record was
reset to pending, so the waiter held a terminal record: the engine refused its
dispatch_wait_at merge and other waiters never saw it in the FIFO. The wait
(and the idle wait after it) now follows the `--status pending` update; s1
pins the order and u3c shows why a terminal self record cannot signal.
F2: the real-herdr box teardown survives a hung stop/delete, kills a server
bootstrapped by a late client call, and asserts the server and HOME are gone.
F3: the delegate-job SKILL.md exit 5 row names the registry wait.
Also drops the dead loop in s1.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The FIFO is (created_at, job_id) at second resolution; B and C registered
within the same second once in the full suite, C sorted first by id and
cleared while B's signal was still fresh, so the stale line never printed.
C7 already keeps the 1.2 s gap; C8 now does too and asserts the order.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
MAM_ONBOARD_WAIT_S (min 1, 600) and MAM_DISPATCH_WAIT_S (min 0, 600) in
test_issue26_ints.INT_KNOBS, which pins every mam_int_knob call. The
real-herdr box's teardown removes its HOME once more after a second:
herdr writes .local/state/herdr/agent-detection a moment after the
server is gone, which left an empty /tmp/mam50-* behind.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Reproduction first (herdr 0.9.3, a real claude, one-off server, job
51ccd800): after a job that left a background subagent running
(`← 1 agent` on screen for 5 min), herdr reported `working` only while
the job ran and `idle` ~10 s after `completed`; a second submit with a
20 s idle wait was injected, not cancelled. The 2026-10-04 observation
(0.9.1, 10+ min of `working`) does not reproduce on 0.9.3, so the herdr
idle wait stays and the registry wait runs before it (plan §4.3 (나)).
- lib_py/delegation/wrapper.py: `open-jobs` (diagnostic) and
`wait-open-jobs`. An open job of the session is live when the #18
contract says so: `running` with an event in events.log within
idle_timeout_sec; `pending` with a dispatch signal (dispatch_wait_at,
else created_at) within ack_timeout_sec. A dead record is reported
(`stale open job <id> ignored (...)`) and never waited for. The waiter
signals every 10 s by merging dispatch_wait_at into its own pending
record through the registry's transition boundary (status untouched, no
event), so later waiters see it alive; a waiter whose wrapper is gone
stops and its signal goes stale (Creator's challenge, job bf8863e1).
Release is FIFO by (created_at, job_id): `clear` when no live running
job remains and this job is the earliest live pending one; `busy <ids>`
at the bound min(MAM_DISPATCH_WAIT_S, remaining wall clock).
- the wrapper: _registry_wait after the preflight in both dispatch paths;
`busy` closes the job as cancelled/session_busy (phase registry_wait),
exit 5 - the existing contract.
- tests/test_issue50_dispatch.py: the open-job table (status x age x
signal x spelling), FIFO and the tie, the signal as a registry merge,
the bound, a dead wrapper, finalize-end's new phase, both call sites.
- tests/test_issue50_dispatch_herdr.py: a real herdr 0.9.3 server per
test (short mkdtemp HOME, fake claude the server reports idle, the real
publish path over the suite's broker): C1 wait-then-run, C2 the bound,
C3 a dead running record, C4 the loop runner's first job behind an
onboarding, C5 a session without a row, C7 two waiters in FIFO order
with no cancellation, C8 a killed waiter skipped once stale; and three
concurrent `create --onboard` / `worktree_prepare.sh --onboard` in one
server (one server process survives the shims' concurrent bootstrap,
so no bootstrap lock is needed).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The handshake only said the agent saw the prompt (#23). create_session.sh
now waits, after `started`, for the onboarding job to reach a terminal
status and makes that its own result, so the orchestrator learns it from
create's exit (MULTI_AGENT_RULES §6) instead of guessing from herdr's
agent_status:
- lib_py/delegation/wrapper.py: `wait-terminal` (completed|error|cancelled,
`timeout` after --timeout, `missing` when the record is gone; stops with
its caller via --watch-pid) and `onboard-exit` (completed 0, error or
cancelled 44, timeout or missing 45). bash branches on the printed answer.
- lib.sh: delegate_wait_terminal / delegate_onboard_exit, thin calls.
- create_session.sh: `onboarding completed: job <id> (<n>s)` on stdout, or
`last_visible_status: onboarding-<status>` on the row, the reason on stderr
and `exit 44` / `exit 45` after `trap - EXIT` - the session is kept, as for
a missing handshake. The "no started" path (error, exit 0 before) now ends
with 44. MAM_ONBOARD_WAIT_S (default 600, floor 1) bounds the wait.
- worktree_prepare.sh: 44/45 pass through with "session and worktree kept".
- create SKILL.md exit table (44, 45) and the knob; the #42 inventory follows.
- tests/conftest.py: --onboard is the default, so ~60 sandbox create tests
reach the new wait. The mock herdr now acts as the agent for create's
onboarding prompt - it runs the publish commands the prompt names through
the real publish_event.py - and MAM_ONBOARD_WAIT_S=3 caps a test that turns
that off (MAM_MOCK_ONBOARD_HANDSHAKE=0 -> 44, `started` -> 45). The
delegate-job wrapper's prompt has another shape and is never answered.
- tests/test_issue50_onboard.py: the decision tables, create in the sandbox
(0 / 44 / 45, session kept, row note, trap window), the knob's integer
rule, worktree_prepare's pass-through.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
An agent pane inherits HOME_DIR, CLAUDE_PROJECT_DIR and LOCAL_BIN from
lib.sh's exports (and the adapters read CODEX_HOME). DiscoveryContext
prefers CLAUDE_PROJECT_DIR over the home_dir a test passes and every
adapter path reads HOME_DIR before HOME, so a suite run by an agent
wrote fake conversation folders into the user's real ~/.claude/projects
(test_adapter_discover, 40 folders on 2026-10-10).
- conftest._isolate_agent_homes (autouse): drops the four pane variables
for every test, so HOME - which the suite's tests set for an isolated
home - governs, as in a plain shell. Dropped rather than pointed into
tmp_path: a fixture-set HOME_DIR would shadow the 11 adapter-contract
tests that set HOME alone, the same way the pane's value did.
- conftest.agent_home_leak_guard (session autouse) + tests/_agent_home_guard.py:
snapshots the entry names of the real claude/agy/codex/grok/opencode/
hermes conversation directories (as the ambient environment names them,
recorded in pytest_configure) and fails on new ones; read-only. A claude
folder whose name decodes (against the file system) to a real directory
outside the temp roots is an operating agent's and is not counted.
- tests/test_issue55_agent_homes.py: the dropped-variable list is pinned
against the env reads of lib_py/agents, lib_py/paths.py and lib.sh;
guard unit tests; the issue's reproduction as a subprocess regression
(on base 42e5173 it leaves <dir>/-…-test-adapter-discover0-ws/u-c1.jsonl).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
GodopuandClaude Opus 5.5
GodopuandClaude Fable 5.1